Metal balers are special equipment for processing metal waste. After processing, various metal scraps, steel shavings, scrap steel, scrap iron, scrap copper, scrap aluminum, aluminum shavings, dismantled car shells, waste oil barrels and other metal raw materials can be squeezed into various shapes such as cuboids and cylinders. It is convenient for storage, transportation and recycling, and becomes a high-quality material for the smelting industry. This machine has an independent power device, and each moving part is driven by a hydraulic device. The work is stable and reliable. The main cylinder and the side cylinder are fully pressed forward. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs.

Features

The metal baler series equipment has the following characteristics:

1. All adopt hydraulic drive, work smoothly, safely and reliably;

2. Manual or PLC automatic control operation mode;

3. The discharging forms are: side push, front push, turn out and manual discharging;

4. Product specifications and types: metal balers are 125 tons to 1250 tons, which can meet the different needs of customers at different levels.

5. Customized press box size and bale size.

Alligator shear for its structural principle similar to the alligator up and down the alligator and named, due to the simple design and structure of the machine, low failure rate, shear pressure, low maintenance costs and the advantages of the market unanimously recognized, is widely used in the round steel, square steel, angle steel, I-beam, plate steel, steel pipe and other scrap cold shear, hot rolled small steel sized shear, steel rolling mill profiles sized shear, steel scrap, small briquettes, steel plate, metallurgical Furnace material heavy waste shear processing. Suitable for metal recycling processing plant, scrap car dismantling and so on.

Working principle:

Alligator shear in the structure of the upper and lower alligator shear structure, in the principle of work through the hydraulic pump drive to form the pressure in the electromagnetic reversing valve and the control of the oil circuit to achieve the cylinder lift and contraction, through the principle of leverage in the cylinder under the pressure of the push-up to realize the upper alligator downward auxiliary locking cylinders will be pre-pressure locking of the material in the main cylinder under the role of the continuous push-up on the alligator knife and the lower alligator knife to achieve the interaction of the cutting so that the material into the incision cut. The material entering the cutter is cut off.